Pavement Concrete Mold Garden Walkway Driveway

Description

Pavement Concrete Mold Garden Walkway Driveway Path DIY Maker Mould Plastic

Description

• Condition: 100% New
• Color: Black
• Material:Plastic
• Size(approx): 17-1/2″ x 15-1/4″ x 1-1/2″
• Feature：
• Solid construction & much better quality
• Easy for you to use. Just fill mold with concrete, smooth surface, and remove mold and you’re done
• DIY walkway with any color,creat a style of your own garden path as you want
• Can use repeatedly,one mold can create your unique garden path
• How to use this Concrete Paver Mold to build the pathways:
• Step 1: Mix cement with water, according to package directions. When ready to use, the concrete will be the consistency of oatmeal and thick enough to hold an edge when you slice into it with a shovel.
• Step 2: Fill the paver mold, scooping the concrete in with a shovel and making sure to fill each area.
• Step 3: Using rubber gloves, spread the concrete around the mold, filling in any gaps or low points. Tap the mold with your hand to eliminate any air bubbles.
• Step 4: Following the contours of the mold, smooth out the concrete, wiping away any excess.
• Step 5: Allow the concrete to set for a maximum of five minutes, then carefully remove the mold. For the next stretch, rotate the mold a quarter-turn and place it beside the paver just completed, angling slightly if you’re creating a curving pathway.
• Step 6: After letting the concrete cure overnight, fill the cracks with dirt and wash away any excess. Wet the ground around the newly formed pavers to help them settle.
• Warm Note: 1. Clean the concrete garden molds for reusing, spray them with garden hose. 2. Garden stone mold can be used again right after you pour the first garden stepping stone so you do not have to wait.
• Package Included:
• 1x Garden Paving Mold

Our other same products Click

Our other hotselling products on youtube